A Division of C-Therm
English
English
Russian
French
Chinese
Spanish
Blog Webinars Tech Library Videos Newsroom Helpful Links & Tools Careers Distributors

Tech Library

Powders

Search the Tech Library by keyword or browse a specific category below.

Additive Manufacturing Aerogel Application Highlight Automotive Battery Bio-Based Insulation Blending Brochure Building Materials Ceramics Composites Dielectric Dynamic Mechanical Analysis Effusivity Electronics Emissivity Energy Storage Explosives Fiber/Fibre Flex Transient Plane Source FLEX Transient Plane Source (TPS) Foams Geology Graphene Heat Transfer Fluids Insulation Liquids Metals Modified Transient Plane Source (MTPS) Method Nanomaterials Oil and Gas Optics Paste Phase Change Materials Photovoltaic Plastics Polymers Potting Compounds Powders Semiconductor TAL Textiles Thermal Analysis Thermal Conductivity Thermal Interface Materials Thermal Management Systems Thermal Radiation Thermoelectrics Thin Films Transient Hot Wire (THW) Transient Line Source (TLS) Method
A comparative study on thermal behavior of PEG 400 and two oxide nanocolloids
Fluids plays a significant role in all heating and cooling processes, while their thermal conductivity is extremely relevant for a large number of heat exchange applications. This paper mainly...
Trident™ Thermal Conductivity Application Highlight: Testing Granular Materials Using the TLS Needle Probe
The following Application Highlight features the use of the Transient Line Source method in the thermal conductivity testing of granular materials.  Granular materials (such as polymeric pellets,...
Trident™ Thermal Conductivity Application Highlight: Thermal Mapping and Filler Settling Detection in Polymer Composites With MTPS
The following Application Highlight features the use of the Modified Transient Plane Source method as a qualitative screening tool for the detection of filler dispersion uniformity in polymer...
Fabrication of Zinc-Loaded Hollow Glass Microspheres (HGMs) for hydrogen storage
Abstract: The greatest challenge for a feasible hydrogen economy lies on the production of pure hydrogen and the materials for its storage with controlled release at ambient conditions. Hydrogen with...
Biochar-red clay composites for energy efficiency as eco-friendly building materials- Thermal and mechanical performance
Abstract: Biochar and red clay were used to develop eco-friendly building materials with improved thermal and mechanical performance. Rice husk, coconut shell, and bamboo were prepared by thermally...
Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts
Abstract: Additive manufacturing technology has enabled industries to generate functional parts with an increased level of complexity via layer-by-layer fabrication. In laser-powder bed fusion...
Thermal, electrical and mechanical properties of carbon fiber/copper powder/carbon black reinforced hybrid Polyamide 6,6 composites
Abstract: The development of low electrical and thermal properties of Polyamide (PA), which is used in place of metals in engineering applications, draws attention to the developments in various...
Shape-stabilized phase change material for thermal energy storage: Sr+2 doped BaCO3 matrix incorporating polyethylene glycol
Abstract: An Sr2+-doped BaCO3 matrix incorporating polyethylene glycol (PEG-6000) was developed using a simple impregnation process to build a shape-stabilized functional phase transition composite...
Exceptionally high energy storage density for seasonal thermochemical energy storage by encapsulation of calcium chloride into hydrophobic nanosilica capsules
Abstract: Thermochemical energy storage (TCES) in salt hydrates is a promising method for seasonal thermal energy storage. However, salt hydrates suffer from agglomeration and deliquescence...

This website uses cookies to ensure you get the best experience on our website. Learn more

Accept