A Division of C-Therm
English
English
Russian
French
Chinese
Spanish
Blog Webinars Tech Library Videos Newsroom Helpful Links & Tools Careers Distributors

Tech Library

Potting Compounds

Search the Tech Library by keyword or browse a specific category below.

Additive Manufacturing Aerogel Application Highlight Automotive Battery Bio-Based Insulation Blending Brochure Building Materials Ceramics Composites Dielectric Dynamic Mechanical Analysis Effusivity Electronics Emissivity Energy Storage Explosives Fiber/Fibre Flex Transient Plane Source FLEX Transient Plane Source (TPS) Foams Geology Graphene Heat Transfer Fluids Insulation Liquids Metals Modified Transient Plane Source (MTPS) Method Nanomaterials Oil and Gas Optics Paste Phase Change Materials Photovoltaic Plastics Polymers Potting Compounds Powders Semiconductor Specific Heat Capacity (Cp) TAL Textiles Thermal Analysis Thermal Conductivity Thermal Interface Materials Thermal Management Systems Thermal Radiation Thermoelectrics Thin Films Transient Hot Wire (THW) Transient Line Source (TLS) Method
Trident™ Application Highlight: In-Line Thermal Effusivity Monitoring for Adhesive Dispensing Systems
This document highlights the integration of the Modified Transient Plane Source (MTPS) as an inline sensor for real-time monitoring of filler stability and material homogeneity in thermal adhesive...
Trident™ Thermal Conductivity Application Highlight: Potting and Impregnation Materials
The following Application Highlight addresses the measurement of materials used for potting and impregnation applications using the Modified Transient Plane Source (MTPS) method. Potting and...
Trident™ Thermal Conductivity Application Highlight: Thermal Mapping and Filler Settling Detection in Polymer Composites With MTPS
The following Application Highlight features the use of the Modified Transient Plane Source method as a qualitative screening tool for the detection of filler dispersion uniformity in polymer...
Trident™ Application Highlight: Monitoring Resin Stability and Filler Sedimentation with MTPS
This document highlights the use of the Modified Transient Plane Source (MTPS) method for monitoring filler sedimentation in thermally conductive resin systems, demonstrating real-time detection of...
Improved Potting of Litz Wires for High Power Density Electric Motor
Specific details including selections of process materials, tooling/fixture setups, and a stepby-step procedure for scaling-up demonstrations of the newly developed potting process, namely...

This website uses cookies to ensure you get the best experience on our website. Learn more

Accept