A Division of C-Therm
English
English
Russian
French
Chinese
Spanish
Blog Webinars Tech Library Videos Newsroom Helpful Links & Tools Careers Distributors

Tech Library

Foams

Search the Tech Library by keyword or browse a specific category below.

Additive Manufacturing Aerogel Application Highlight Automotive Battery Bio-Based Insulation Blending Brochure Building Materials Ceramics Composites Dielectric Dynamic Mechanical Analysis Effusivity Electronics Emissivity Energy Storage Explosives Fiber/Fibre Flex Transient Plane Source FLEX Transient Plane Source (TPS) Foams Geology Graphene Heat Transfer Fluids Insulation Liquids Metals Modified Transient Plane Source (MTPS) Method Nanomaterials Oil and Gas Optics Paste Phase Change Materials Photovoltaic Plastics Polymers Potting Compounds Powders Semiconductor TAL Textiles Thermal Analysis Thermal Conductivity Thermal Interface Materials Thermal Management Systems Thermal Radiation Thermoelectrics Thin Films Transient Hot Wire (THW) Transient Line Source (TLS) Method
Trident™ Thermal Conductivity Application Highlight: Pyrolytic Graphite Foils and TPS
The following application highlight addresses the in-plane thermal conductivity of the Pyrolytic Graphite Foils (900-1800 W/mK), characterized using the C-Therm TPS Module with the Slab...
Study on the thermal conductivity and density of foam glass
Abstract: This paper focuses on the relationship between the composition of foam glass and its thermal conductivity and density. In this experimental research, three levels of glass particle size and...
Glass-ceramic foams produced from zeolite-poor rock (Tokaj)
Abstract: This study evaluated the possibility of producing innovative glass-ceramic foams from zeolite-poor rock (Tokaj, Hungary) using alkali-activation and reactive sintering techniques. The...
Air drying scalable production of hydrophobic, mechanically stable, and thermally insulating lignocellulosic foam
Abstract: Demand for sustainable building thermal regulation is driving the development of low carbon-intensive, renewable, and safe-to-use materials to substitute the dominant synthetic polymers and...
Multifunctional Carbon-Based Hybrid Foams for Shape-Stabilization of Phase Change Materials, Thermal Energy Storage, and Electromagnetic Interference Shielding Functions
Abstract: Carbon-red mud foam/paraffin hybrid materials were prepared and studied for their thermal energy storage and electromagnetic interference (EMI) shielding properties. The host matrices were...
Thermal Modeling of Driver/Seat Interfaces in Automotive Applications
Abstract: A thermophysical model of the dynamic interactions between an automobile driver and a heated seat is presented. The model uses the experimentally measured averaged load distributions to...
Basalt fiber-reinforced foam concrete containing silica fume: An experimental study
Abstract: Foam concrete refers to a type of low-density concrete that is commonly known to have favorable insulation and thermal performance due to its intentionally increased porosity. However, foam...
Polyimide foam composites with nano‑boron nitride (BN) and silicon carbide (SiC) for latent heat storage
Abstract: Leaching and instability in wax-based phase change materials (PCMs) are serious application problems. Herein, we developed paper-like (~ 100 µm) fexible, composite PCMs by hydraulic...
Recycling of Automotive Vehicle’s Waste Glass to Develop Sustainable Glass Foam using a Curing-Sintering Process
Abstract: In Australia, yearly, around 22,500 Tons of waste glasses (WG) are discarded from end-of-life vehicles being landfilled because of the costly and convoluted recycling process. This...

This website uses cookies to ensure you get the best experience on our website. Learn more

Accept