A Division of C-Therm
English
English
Russian
French
Chinese
Spanish
Blog Webinars Tech Library Videos Newsroom Helpful Links & Tools Careers Distributors

Tech Library

Flex Transient Plane Source

Search the Tech Library by keyword or browse a specific category below.

Additive Manufacturing Aerogel Application Highlight Automotive Battery Bio-Based Insulation Blending Brochure Building Materials Ceramics Composites Dielectric Dynamic Mechanical Analysis Effusivity Electronics Emissivity Energy Storage Explosives Fiber/Fibre Flex Transient Plane Source FLEX Transient Plane Source (TPS) Foams Geology Graphene Heat Transfer Fluids Insulation Liquids Metals Modified Transient Plane Source (MTPS) Method Nanomaterials Oil and Gas Optics Paste Phase Change Materials Photovoltaic Plastics Polymers Potting Compounds Powders Semiconductor Specific Heat Capacity (Cp) TAL Textiles Thermal Analysis Thermal Conductivity Thermal Interface Materials Thermal Management Systems Thermal Radiation Thermoelectrics Thin Films Transient Hot Wire (THW) Transient Line Source (TLS) Method
TIM Tester Application Highlight: Apparent Through-Plane Thermal Conductivity of Pyrolytic and Expanded Graphite Sheets Under Applied Compression
This document highlights the use of the ZFW TIM Tester to characterize the apparent through-plane thermal conductivity of pyrolytic and expanded graphite sheets under applied compression from 0.1 to...
Trident™ Application Highlight: Anisotropic Thermal Conductivity Characterization of Cylindrical Battery Cells
This document highlights how Single-Sided TPS combined with the Anisotropy Utility can be used to determine the directional thermal conductivities of 18650 and 21700 cylindrical...
Trident™ Application Highlight: Thermal Conductivity of Pressure-Sensitive Adhesives for EV Systems
This document highlights the use of the C-Therm's Transient Plane Source (TPS) Thin Films Utility to characterize thin acrylic pressure-sensitive adhesive films for EV battery module thermal...
Trident™ Application Highlight: Impact of Saturation on the Thermal Conductivity of Subsurface Geomaterials
This document highlights the use of the Transient Plane Source (TPS) method to characterize the thermal conductivity of sandstone and shale core samples at varying saturation levels, in accordance...
Use of Thermomechanical Analysis (TMA) in Sintering Simulation of Ceramics
The sintering process of ceramics or metal injection molding (MIM) can be divided into the debinding and the sintering processes. Conventionally, TG-DTA (STA) is used to investigate the debinding...
Trident™ Thermal Conductivity Application Highlight: The Role of Thermal Conductivity in Electric Motors
In electric motor (e-motor) applications, thermal management is a critical design consideration due to the high power densities and compact packaging typical of modern systems. As motors operate,...
Trident™ Application Highlight: Thermal Conductivity of Thermal Interface Materials Under Compression
This document highlights the use of the Transient Plane Source (TPS) method to characterize the thermal conductivity of silicone and non-silicone thermal interface materials (TIMs) under varying...
Trident™ Application Highlight: Thermal Conductivity and Effusivity of Latex and Non-Latex Condoms
This document highlights the measurement of thermal conductivity and thermal effusivity of latex and non-latex condoms using the Transient Plane Source (TPS) Thin Films Utility and the Modified...
Rock thermal conductivity and thermal inertia measurements under martian atmospheric pressures
The physical properties of rocks on planetary surfaces influence their bulk thermal conductivity (k) and thermal inertia (TI); however, there has been little work done to date to explore quantitative...

This website uses cookies to ensure you get the best experience on our website. Learn more

Accept