A Division of C-Therm
English
English
Russian
French
Chinese
Spanish
Blog Webinars Tech Library Videos Newsroom Helpful Links & Tools Careers Distributors

Tech Library

Battery

Search the Tech Library by keyword or browse a specific category below.

Additive Manufacturing Aerogel Application Highlight Automotive Battery Bio-Based Insulation Blending Brochure Building Materials Ceramics Composites Dielectric Dynamic Mechanical Analysis Effusivity Electronics Emissivity Energy Storage Explosives Fiber/Fibre Flex Transient Plane Source FLEX Transient Plane Source (TPS) Foams Geology Graphene Heat Transfer Fluids Insulation Liquids Metals Modified Transient Plane Source (MTPS) Method Nanomaterials Oil and Gas Optics Paste Phase Change Materials Photovoltaic Plastics Polymers Potting Compounds Powders Semiconductor Specific Heat Capacity (Cp) TAL Textiles Thermal Analysis Thermal Conductivity Thermal Interface Materials Thermal Management Systems Thermal Radiation Thermoelectrics Thin Films Transient Hot Wire (THW) Transient Line Source (TLS) Method
TIM Tester Application Highlight: Apparent Through-Plane Thermal Conductivity of Pyrolytic and Expanded Graphite Sheets Under Applied Compression
This document highlights the use of the ZFW TIM Tester to characterize the apparent through-plane thermal conductivity of pyrolytic and expanded graphite sheets under applied compression from 0.1 to...
Trident™ Application Highlight: Anisotropic Thermal Conductivity Characterization of Cylindrical Battery Cells
This document highlights how Single-Sided TPS combined with the Anisotropy Utility can be used to determine the directional thermal conductivities of 18650 and 21700 cylindrical...
Trident™ Application Highlight: Thermal Conductivity of Pressure-Sensitive Adhesives for EV Systems
This document highlights the use of the C-Therm's Transient Plane Source (TPS) Thin Films Utility to characterize thin acrylic pressure-sensitive adhesive films for EV battery module thermal...
Trident™ Application Highlight: Specific Heat Capacity Characterization of Battery Cells Using the TPS Cp Utility
This document highlights the use of the Transient Plane Source (TPS) Cp Utility for non-destructive measurement of specific heat capacity (Cp) in lithium-ion pouch and cylindrical battery...
Trident™ Thermal Conductivity Application Highlight: Characterization of a Battery Pouch’s Anisotropic Thermal Conductivity
This Application Highlight illustrates C-Therm’s FLEX Transient Plane Source (TPS) system being utilized to investigate the anisotropic thermal conductivities of a lithium pouch battery cell using...
Trident™ Thermal Conductivity Application Highlight: Measuring the Through-Plane Thermal Conductivity of Gas Diffusion Layers
The following Application Highlight addresses the through-plane thermal conductivity measurement of two gas diffusion layer membranes on the C-Therm Trident FLEX Thin Films Module. Understanding the...
Trident™ Application Highlight: In-Line Thermal Effusivity Monitoring for Adhesive Dispensing Systems
This document highlights the integration of the Modified Transient Plane Source (MTPS) as an inline sensor for real-time monitoring of filler stability and material homogeneity in thermal adhesive...
Heat transfer in phase change materials for integrated batteries and power electronics systems
An integrated batteries and power electronics system has great potential in improving the compactness, flexibility and multifunctionality in electrical vehicles. However, it needs to overcome thermal...
Trident™ Application Highlight: Accelerated Performance Validation of Thermal Adhesives for EV Battery Packs
This document highlights the use of the Modified Transient Plane Source (MTPS) method in the measurement of uncured and cured thermal interface materials during R&D formulation development. HB...

This website uses cookies to ensure you get the best experience on our website. Learn more

Accept